SUP Repair Kit
$24.95
By briskites
Stormsure Stand Up Paddle Board (SUP) repair kit is perfect to repair leaks, holes, cracks and rips on all types of regular and inflatable Stand Up Paddle Board (SUP) and Surfboards. Perfect for also repairing damaged inflatable ski tubes, boats, and sails.
Containing everything you need to perform a successful repair, STORMSURE repair kits are easy to use with easy to follow instructions.
CONTENTS:
2x 5g STOMSURE flexible repair adhesive
1x TUFF Tape Strip (15cm x 7.5cm)
2x TUFF Tape Circular Patches (75mm)
1x Disposable Gloves & Instruction
DIRECTIONS:
Easy Instant Repairs
Lay your surface flat, clean the area and ensure it’s dry. Apply a Tuff Tape patch or strip directly to the damaged area, rub firmly until there are no air bubbles under the patch. Quick Tip, if you’re repairing in cold weather after rubbing heat the patch slightly with a hair dryer just until it’s warm and then rub it smooth again.
Challenging Repairs
Clean the area and ensure it’s dry. Sand paper provides excellent results to clean the area. Apply STORMSURE flexible repair adhesive, allow a 5mm overlap. Leave to cure for 10-12 hours, apply a Tuff Tape patch for further protection of the area if needed.
Containing everything you need to perform a successful repair, STORMSURE repair kits are easy to use with easy to follow instructions.
CONTENTS:
2x 5g STOMSURE flexible repair adhesive
1x TUFF Tape Strip (15cm x 7.5cm)
2x TUFF Tape Circular Patches (75mm)
1x Disposable Gloves & Instruction
DIRECTIONS:
Easy Instant Repairs
Lay your surface flat, clean the area and ensure it’s dry. Apply a Tuff Tape patch or strip directly to the damaged area, rub firmly until there are no air bubbles under the patch. Quick Tip, if you’re repairing in cold weather after rubbing heat the patch slightly with a hair dryer just until it’s warm and then rub it smooth again.
Challenging Repairs
Clean the area and ensure it’s dry. Sand paper provides excellent results to clean the area. Apply STORMSURE flexible repair adhesive, allow a 5mm overlap. Leave to cure for 10-12 hours, apply a Tuff Tape patch for further protection of the area if needed.
